SINGER 14T968DC - Manual (Page 65)

D
C
B
A
64
An overlock machine requires more maintenance than a
conventional machine for two reasons:
1) A lot of lint is produced due to the cutting action
of the knives.
2) An overlock runs at a very high speed and needs
to be oiled frequently to lubricate the internal
working parts.
Clean the lint from the looper and knife area often
with a dry lint brush.
Before cleaning your machine, disconnect
power line plug from the wall receptacle.
The oiling points shown in the diagram, should be
oiled periodically.
Note: Use only sewing machine oil. Do not use any
other oil or damage could result.
Before lubricating your machine, disconnect
power line plug from the wall receptacle.
Oiling the Machine
Cleaning the Machine
26. MACHINE MAINTENANCE
Danger:
Danger: