SINGER 9910 Quantum - Manual (Page 68)

68
TWIN NEEDLE SEWING
Interesting decorative stitches can be produced by
using twin needles and threading the machine with
two different colors of thread. Always make test
samples to help you determine the settings best
suited to a specific purpose.
All patterns except No. 10, 59-64 may be sewn
with a twin needle.
General Purpose Foot or Satin Foot
Note:
A twin needle is not provided with this machine.
Call for your Singer Dealer to purchase.
CAUTION: To prevent accidents.
a. Use only needle designed for this machine
(Singer Style 2025). Other needles may break.
b. The needle threader cannot be used. Thread
each needle eye by hand.
1. Remove the single needle and insert twin
needle.
2. Thread first thread as usual following threading
route.
3. Thread the left needle eye by hand from front to
back .
4. Push the Auxiliary Spool Pin with felt washer
into the hole.
5. Place second spool of thread and pass thread
through the guide and bring frontward.
6. Thread second thread the same as first.
7. For better sewing results, do not place the
thread into the needle bar thread guide.
Thread right needle eye by hand from front to
back.
8. Press the twin needle button.
The LED light will turn on and the stitch width
will be reduced automatically.
CAUTION: To prevent accidents.
If you did not press the twin needle button, needle
may hit the needle plate and break.
9. Always test sew selected stitch,
Note:
Some stitches look better than othres sewn in
twin needle mode.
10. Sew project.
2003.9.10, 8:47 PM 68