7 logging in to dmpdm and changing its passwords, Logging in to dmpdm and changing its passwords – Cisco 4305G User Manual

Page 13

background image


The LEDs tell you if your DMP has power and if it has obtained
an IP address.

A solid green LED indicates that a power source
is available.

A solid red LED indicates that your DMP is trying to obtain
an IP address. After your DMP has an IP address, it turns
off the red LED.

The LEDs do not blink unless they are exposed to infrared
signal interference.


Logging in to DMPDM and

Changing its Passwords

Step 1

When your DMP display shows the Cisco logo and
shows an IP address for your DMP, write down the
IP address.