SINGER SEQS-6700 FUTURA QUARTET Instruction Manual - Manual (Page 31)

29
Fabric marking
Buttonhole foot alignment position
Fabric marking
Mark
5. Carefully mark the position of buttonhole on your garment.
6. Place the fabric under the foot. Pull out the bobbin thread
underneath the fabric to a length of about 4 inches to the rear.
7. Align the buttonhole mark on the fabric with the mark on
the buttonhole foot, and then lower the buttonhole foot.
8. While holding the top thread, start the machine.
* Sewing will be completed automatically in the following order.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7