Threading the bobbin thread – SINGER SEQS-6700 FUTURA QUARTET Instruction Manual User Manual

Page 8

Advertising
background image

6

A

B

THREADING THE BOBBIN THREAD

1. Raise the needle to its highest position by rotating the hand

wheel counter clockwise (toward you).

2. Remove the bobbin cover plate by pushing the release

EXWWRQ WR WKH ULJKW %REELQ FRYHU ZLOO SRS XS VXI¿FLHQWO\ WR
allow you to remove the cover.

3. Insert the bobbin making sure the bobbin rotates counter-

clockwise when you pull the thread.

4. Pull thread through the slot (A) and then to the left.

5. With a finger held gently on top of the bobbin, pull the

thread until it stops in the slot (B). Then pull the thread
along the groove on the needle plate until it is snipped with
cutter on the top left.

6. Replace the clear bobbin cover plate onto the needle plate.

NOTE: Sewing can be started without having to pull
up the bobbin thread.

NOTE: This is a very important step. The bobbin
must rotate counterclockwise when thread is pulled.

A

Groove

Cutter

Advertising
This manual is related to the following products: