SINGER SEQS-6700 FUTURA QUARTET Instruction Manual - Manual (Page 42)

40
PREPARING THE MACHINE BEFORE
INSTALLING THE HOOP
1. Turn hand wheel counter clockwise (toward you) until the
needle comes to its highest position.
1
ATTACHING AND REMOVING
EMBROIDERY HOOP
1. Raise presser foot and needle, and push up lever (A) of
HPEURLGHU\ IRRW ZLWK \RXU ¿QJHU DQG SDVV HPEURLGHU\ KRRS
under it.
¿ To remove, pull the hoop forward to slide it out from
underneath the embroidery foot.
2. Slide the hoop onto the embroidery unit from front to back
until it clicks into place.
¿ To remove, press the hoop release lever and slide the hoop
towards you.
NOTE: Before attaching the small hoop, turn on the power
switch to move the carriage to the ready position.
( A )
2
1
Hoop mounting plate
Carriage
Hoop release lever