Vinten Radamec SP-2000 Pedestal - Manual (Page 13)

SP-2000/X-Y Safety & Introduction
User Manual 1-3
Other E-StOP Switches
An E-Stop switch for each pedestal (of the type shown below) is installed at
each operator location and optionally at other locations.
Make sure that all personnel are aware of the location and
operation of these E-STOP switches before operating the
equipment. Press down firmly on the E-STOP switch to imme-
diately disable the associated pedestal and head.
After clearing the cause for the emergency stop, pull up the appropriate E-STOP
switch. The pedestal and head can now be powered up and targeted - see Chap-
ter 2 for operating procedures.