Vinten Radamec SP-2000 Pedestal - Manual (Page 60)

SP-2000/X-Y Installation
3-20 User Manual
8. Run the power/data cable from the power supply through the cable clamp
on the pedestal base to provide strain relief. Loop the cable to the Power/
Data In connector on the SP-2000/X-Y rear panel. Run the power/data
cable alongside the camera triax (or multicore) cable and any other cables
that connect to the camera system in your installation.
9. You may want to use a light weight jacketing material for the cable bundle
to each pedestal. Several customers have reported that a product called
“Flexo” works well. Flexo is sold in several diameters (1.25” is usually a
good choice) and is available from:
Cable Clamp
Power/Data In Power/Data Out