Vinten Radamec SP-2000 Pedestal User Manual
Page 66
Advertising
SP-2000/X-Y
Installation
3-26
User Manual
11. Push the column down to its minimum height and disconnect the MCB
controller from the pedestal control panel.
12. Using at least two people, install the brace frame onto the top of the pedes-
tal column.
13. Install the three remaining sides of the crate, matching the foam padding to
the shape of the pedestal.
14. Using at least two people, install the top of the crate.
15. Insert the four straps in the cut outs in the top of the crate. Pull the each
strap hand tight and then close the latch to tension the strap.
Advertising