Vinten Radamec Control (VRC) - Manual (Page 12)

Getting Started
11
4. Type in your password and then touch Enter to launch the VRC Client
application.
For a detailed description of using the client application – See VRC Client User
Interface on page 21.
Calibrating the touch screen
All VRC system monitors are touch screen enabled, allowing on-screen options to be
selected by touching the relevant graphic with your finger. You can also select these
options by clicking on them with the mouse. The touch screen system closely
resembles the Radamec TCPi system and can control multiple camera units.
The location that you touch and the “button” on the screen are physically separated
by the thickness of the touch screen glass. Therefore, depending on how you sit and
your angle of view, the touch screen may need calibrating. If you find the on-screen
pointer no longer matches the position of your finger on the screen you should
recalibrate the touch screen.
Sitting in your normal position, locate and run the touch screen calibration utility
provided by the screen manufacturer in Start > All Programs. Follow the screen
instructions to calibrate the screen for your use.
Refer to the documentation provided with your screen for information on regular
maintenance, cleaning and setting up your touch screen.
Fig. 5 VRC EPI Server window