Vinten Radamec Control (VRC) - Manual (Page 28)

VRC Client User Interface
27
Once selected, any camera can be controlled from the joystick control panel, or using
the virtual joystick and controls on the touch screen.
When a camera is selected, you can elect to only display the shots stored for that
camera in the Stored Shot Pane, if the Per Camera configuration option is selected –
see Grid display options on page 66.
A text field indicating the selected camera is displayed above the grid of shots.
Button mapping
The default order in which cameras appear on the touch screen Camera Selection
and Status buttons and the control panel camera select buttons is determined by the
system configuration files. The Button Mapping utility program (refer to the VRC
Technical Guide, publication no. V4009-4990) can be used to map any camera to any
button (or to multiple buttons) on the control panel and touch screen as part of a
Button Map group.
You can define multiple button map groups of cameras to match your workflow.
Button map groups are displayed above the grid on the touch screen, if they are
enabled in the Configuration screen – see Group display preferences on page 75.
Typical workspaces for two button map groups called Studio A and Studio B were
configured using the assignments listed below:
Studio A Studio B
Button # Device Button # Device
1 FP145 (pedestal) 1 PED (SP-2000)
2 PED (SP-2000) 2 HEIGHT (FBH175)
3 Not assigned 3 2010 (HS-2010)
4 Not assigned 4 Not assigned
5 Not assigned 5 Not assigned
6 Not assigned 6 Not assigned
7 HS105 7 Not assigned
8 HEIGHT (FBH175) 8 Not assigned