Vinten Radamec Control (VRC) - Manual (Page 76)

Configuration
75
Group display preferences
The default order in which cameras appear on the control panel buttons and
touchscreen buttons is determined by the system configuration files at installation.
The button mapping utility program (refer to the VRC Technical Guide, publication no.
V4009-4990) can be used to map any camera to any button (or multiple buttons) as
part of a button map group. You can define multiple button map groups of cameras to
match your workflow.
If button mapping groups have been defined, the Group display preferences
determine if the group names will be displayed on the touchscreen and be available
for selection by the operator.
Allow deselect When you select a shot on
the touchscreen, you can
deselect that shot by
touching it a second time. When you select a shot on
the touchscreen, you can
only deselect that shot by
selecting a different shot on
the same camera. Touching
a selected shot a second
time has no effect.
Fig. 40 Configuration screen – Group display preferences
Option ON OFF
Show Main Panel
Groups Displays the Primary Panel
Groups bar showing the
camera mapping groups.
The height of each row of
thumbnails in the editing
pane is reduced slightly. The Primary Panel Groups
bar is not displayed and
cameras are assigned to
their default buttons.
Option ON OFF
Group Display Preferences
Show
Preview
Panel
Groups
Dock On
Top
Show Main
Panel
Groups