Vinten Radamec Control (VRC) - Manual (Page 92)

Troubleshooting
91
5. For Manual/Robotic heads, make sure that both pan and tilt are in Auto mode.
6. If necessary, select the camera at the VRC Controller and selet
Opts > Enable to switch the head to Auto mode.
7. For all heads, make sure that the tilt centre lock is disengaged.
Fig. 58 Head switches
CAUTION! DO NOT attempt to move the Auto/Manual switches on the head
to Auto (robotic) mode – you will damage the head.
Tilt in AUTO
Pan in AUTO
Centre lock
disengaged