Vinten Radamec Control (VRC) - Manual (Page 86)

85
Troubleshooting
If you cannot control one or more heads and/or pedestals, use the following checklists
to locate and correct the problem.
VRC controller checklist
At the joystick control panel:
1. Make sure that the Joystick panel power is ON.
2. Make sure that Panel Disable is OFF (button is not illuminated).
3. Make sure that Joystick Enable is ON (button is illuminated).
Fig. 51 Joystick control panel
Joystick Enable
ON
Panel Disable
OFF