Vinten Radamec Control (VRC) - Manual (Page 18)

VRC Control Panel
17
Pan/Tilt/Zoom joystick
This joystick [13] controls the pan and tilt movements of the head and the lens Zoom
function. By default:
• Moving the joystick left and right will pan the camera left and right.
• Moving the joystick forward and back will tilt the camera down and up,
respectively.
• Rotating the joystick clockwise will zoom out the camera lens.
• Rotating the joystick counter-clockwise will zoom in.
If required, the direction of camera and zoom movement relative to joystick movement
can be customised in the Configuration Screen - See Configuration on page 65.
Focus control
Rotating the Focus knob [20] adjusts the camera lens focus.
Black level and Iris CCU controls
If the optional CCU interface is installed, the CCU Black level [1] and Iris [2] functions
can be controlled by rotary knobs on the left hand side of the control panel in addition
to the VRC user interface – See CCU Interfaces on page 53.
Wash wipe
The Wash Wipe button [3] activates the wash wipe on the selected externally
mounted environmental camera unit.
X4
During normal operation, the X4 button [11] is off (zoom proportional mode is on) so
that the speed of the pan and tilt movements are proportional to the zoom angle of the
camera lens. Pan and tilt move slowly when you are zoomed in and quickly when you
are zoomed out.
When X4 is on (zoom proportional mode is off), the pan and tilt movements are more
sensitive when zoomed in.
NOTE: For the FHR-120 head, X4 is always off (zoom proportional mode is ON).