Vinten Radamec Control (VRC) - Manual (Page 33)

VRC System User Guide
32
After using Stop to halt a robotic transition, you can:
• Complete that move by selecting the shot again and touching Fade or Cut.
• Make another move, by selecting the required shot and touching Fade or Cut.
Cut
After a shot is selected on the touch screen, Cut becomes available to move the
camera unit from the current shot to the selected shot as fast as possible, ignoring the
stored shot time.
Latched Cut
If Latched Cut is selected on the Edit menu, the camera unit will automatically move
to a new shot as soon as it is selected on the touch screen, with no need to press the
Cut button.
Fade
After a shot is selected on the touch screen, Fade becomes available to move the
camera unit from its current shot to the selected shot with the duration of the transition
determined by the stored time in the shot.
Latched Fade
If Latched Fade is selected on the Edit menu, the camera unit will automatically fade
to a new shot as soon as it is selected, with no need to press the Fade button.
Fade or Cut multiple shots
If Single Select mode in the Configuration is OFF (see Shot preferences on
page 74), you can select shots on more than one camera. If you then you select Fade
or Cut, all of the cameras will start moving at the same time.
NOTE: If the shot cannot be reached within the stored time, the transition is as
fast as possible.
In addition, the fade time can be modified in real-time using the Fade Time
bar on the control panel – see Fade Time control on page 48.
CAUTION! Before initiating a multi-camera move, make sure that the area
around all of the relevant cameras is clear and that the cameras
will not collide with each other.