Welch Allyn Connex ProBP 3400 digital blood pressure device - User Manual - Manual (Page 46)

The default unit of measure is mmHg.
Pressure presets
To select a pressure preset:
1. From the Settings screen, use Up or Down navigation buttons to highlight Pressure
presets.
2. Press the Select button. The Pressure presets menu displays.
3. Use Up or Down navigation buttons to highlight desired pressure.
4. Press the Select button to select the pressure.
The default inflation pressure is 160 mmHg or 21.3 kPa.
Bluetooth wireless technology
To wirelessly transfer data from the ProBP 3400 to another device with Bluetooth technology, you
must enable Bluetooth technology in both devices, then pair and connect the devices. Pairing will
create a unique wireless link between two Bluetooth wireless technology enabled devices.
The default setting for Bluetooth radio is Enable.
Enable Bluetooth radio and pair devices
When trying to pair the ProBP 3400 with a target device, keep the devices within
several meters or feet of each other.
To enable the Bluetooth radio and pair your Bluetooth wireless technology-
enabled devices:
1. From the Settings screen, use Up or Down navigation buttons to highlight Bluetooth
radio.
2. Press the Select button.
3. Use the Up or Down navigation buttons to highlight Enable.
4. Press the Select button to confirm your selection.
5. Press the Down navigation button to highlight the Pair button.
6. Press the Select button to place the ProBP 3400 into Pairing mode.
7. Activate the Bluetooth feature on your target device and search for the ProBP 3400.
Consult your target device's user manual for device-specific instructions.
8. Select the ProBP 3400 from the list of devices found by your target device.
9. Enter the PIN (1234) to pair the ProBP 3400 to your target device.
The ProBP 3400 supports the Secure Simple Pairing feature, which allows the device to be
paired to a target device without requesting a PIN. This feature is available for target devices
that are compliant with Bluetooth version 2.1 or higher.
10. When pairing is complete, the ProBP 3400 will automatically connect to your target device and
will attempt to reconnect to your target device each time the ProBP 3400 is powered on.
When devices are connected, the symbol appears in the left corner of the ProBP 3400
screen.
40 Settings Welch Allyn Connex® ProBP™ 3400 digital blood pressure device