Welch Allyn CardioPerfect Workstation Resting ECG Module - User Manual - Manual (Page 15)

CardioPerfect Workstation
Resting ECG Module - User Manual
DIR 80012333 Ver. E 15 / 54
window.
2. Next see §2.1 follow steps 8-9.
Capture an event
When you notice an event, like arrhythmia, during recording, you can capture this in the ECG.
When you do this, a small exclamation mark is inserted at the place where the event occurred.
To capture an event, click the Event button.
2.11. Cancel a recording
You can cancel a recording at any time in the recording process.
To cancel a recording:
Click the Cancel button in the Real-time monitor. The recording is cancelled and you
are asked to switch off the recorder. The test is not saved.
Tips for canceling a recording:
When you have not yet recorded 10 seconds of regular ECG, you can also cancel the
recording by clicking the Record button.
You can choose to record a regular ECG or a rhythm ECG without leaving the real-time
monitor.
2.12. Pacemaker pulse detection
The Welch Allyn CardioPerfect software is able to display pacemaker pulse spikes detected by
the hardware. These spikes are marked with a symbol in the Real time monitor, in Review mode
and on printouts.
When the Pacemaker pulse detection is on, the detected spikes are marked on the trace, as
shown here. To learn how to disable this function to remove artificial pacemaker signal indicators,
see Customizing the Resting ECG software on 39.
Pacemaker markers