Welch Allyn CardioPerfect Workstation Resting ECG Module - User Manual - Manual (Page 34)

CardioPerfect Workstation
Resting ECG Module - User Manual
DIR 80012333 Ver. E 34 / 54
6. Printing ECGs
6.1. Print an ECG
You can make a printout of each view in the ECG at any time between recording and
interpretation. There are two ways of manually printing an ECG:
One view: Welch Allyn CardioPerfect prints one view in the way it is displayed on the
monitor.
Selected formats: Welch Allyn CardioPerfect prints a number of views simultaneously.
Print formats
The resting ECG Module can print the following reports:
12 averages + 6 rhythm leads
2x6, all pages
2x6, two pages 50 mm/s
2x6
4x3, 25 mm/s
4x3, 50 mm/s
4x3 5 mm/mV
4x3 20 mm/mV
Averages
Large averaged complex
Measurements
OldRhythm
Rhythm
R-R
Vectors
HRV
Each report contains the view and a header that displays additional information.
Please refer to the Workstation manual for further information on printing ECGs.
6.2. Automatically print an ECG
Welch Allyn CardioPerfect can automatically print an ECG directly after recording and after
confirming the interpretation. To automatically print an ECG, you need to enable automatic
printing and select the ECG formats to be printed.
To enable automatic printing:
1. In the File menu, click Settings. The Settings dialog box is displayed.
2. Click ECG and click on the Printing tab.
3. In the Printing tab, click Print after recording and/or Print after interpretation confirmed.
4. Click OK to confirm.