Welch Allyn CardioPerfect Workstation Resting ECG Module - User Manual User Manual
Cardioperfect workstation, Resting ecg module - user manual
Advertising
Table of contents
Document Outline
- Copyright
- User responsibility
- Accessories
- Warranty, Service, and Spare Parts
- Limited Warranty Statement
- Welcome
- 1. Getting started
- 2. Recording ECGs
- 2.1. Record an ECG
- 2.2. Place electrodes on the patient
- Extremity electrodes The electrodes may be placed on any part of the arms or the legs as long as they are below the shoulders in the former and below the inguinal fold anteriorly and the gluteal fold posteriorly in the latter. Any other placement nece...
- Precordial electrodes Connect the precordial electrodes in the following positions:
- Reusable Electrodes
- Disposable Tab Electrodes
- 2.3. Create a new ECG
- 2.4. Select how you want to view leads
- 2.5. Set a rhythm strip
- 2.6. Turn pacemaker on and off
- 2.7. Apply an AC filter
- 2.8. Apply a muscle noise filter
- 2.9. Record an ECG
- 2.10. Recording rhythm ECGs
- 2.11. Cancel a recording
- 2.12. Pacemaker pulse detection
- 2.13. Signal quality indication
- 3. Recording ECGs for pediatric patients
- 4. Viewing ECGs
- To view an ECG:
- 4.1. View and edit ECG information
- 4.2. Views
- 4.3. Parameters
- 4.4. QTc
- 4.5. QT dispersion (optional)
- 4.6. Working with views
- 4.7. Zoom in and out on an ECG
- 4.8. Set chart speed and sensitivity
- 4.9. View one single complex or loop
- 4.10. Turn pacemaker on and off
- 4.11. Apply muscle noise filter
- 4.12. Apply AC filter
- 4.13. Apply baseline filter
- 4.14. Apply anti-aliasing
- 4.15. Make measurements
- 4.16. Compare ECGs
- 4.17. Display markers
- 5. Interpreting ECGs
- 6. Printing ECGs
- 7. Maintaining the recorder
- 8. Customizing the Resting ECG software
- 9. Troubleshooting
- 10. Function keys
- 11. Before installing the Resting ECG software
- 12. Installing the Resting ECG Module
- 13. Safety and precautions