Welch Allyn CardioPerfect Workstation Resting ECG Module - User Manual - Manual (Page 31)

CardioPerfect Workstation
Resting ECG Module - User Manual
DIR 80012333 Ver. E 31 / 54
5. Interpreting ECGs
When you view an ECG, the interpretation is shown in the lower right corner of the workspace. If
you have the optional MEANS software installed on your computer, this software makes an initial
interpretation for you. If not, this is where you can enter your own interpretation.
5.1. About MEANS and PEDMEANS interpretation software
MEANS is short for Modular ECG Analysis System. PEDMEANS is short for Pediatric Modular
ECG Analysis System. They are ECG interpretation programs developed by the University of
Rotterdam in the Netherlands, and can be used to interpret ECGs that were recorded with Welch
Allyn CardioPerfect.
MEANS and PEDMEANS use an algorithm that consists of signal processing, measurements,
rhythm and contour classification. The adult algorithm is applicable to patient ages 18 and higher.
The pediatric algorithm is applicable for ages 1 day through 17 years.
MEANS and PEDMEANS interpretations consist of
A number of statements in different categories
Reasoning supporting the statement
A conclusion
An indication of the severity of the ECG
Missing information
The MEANS algorithm uses the gender and the age of a patient to make a reliable interpretation.
If this information is not present in the patient card, the following assumptions are made:
The patient is male
The patient is 35 years old
If these values are used, this is mentioned at the top of the interpretation.
Important: A computer-generated interpretation cannot replace sound medical reasoning by a
trained professional. Therefore, a physician should always review the interpretation.
5.2. Edit and confirm an interpretation
You can edit an interpretation in the Interpretation editor. In this editor, you can enter your own
Interpretation