Welch Allyn Image Capture System - User Manual User Manual
Page 16
Advertising
8
Chapter 2 Equipment Setup
Welch Allyn Image Capture System
Review Draft
Company Confidential
Aug 24, 2004
Figure 5. Colposcope cable connections
5.
To connect the Video Colposcope to the computer, use the provided RS-232 cable.
Plug the cable end with clips into the top connection on the Video Colposcope and
the 9-pin end to the RS-232 connection plug on the computer.
-Video Cable
Power Cable
RS-232 Cable
S-Video Cable
(to monitor)
Power Cable
DV Converter Back
Video Colposcope
Power Cable
Y/C In
Y/C Out
(to DV Converter)
Video Colposcope Monitor Back
Advertising