Welch Allyn Image Capture System - User Manual - Manual (Page 25)

Directions for Use Chapter 3 Software Setup 17
Review Draft Company Confidential Aug 24, 2004
Figure 14. Timestamp settings
4. The Print tab gives the user the option to print the file name on the page with the
image.
Figure 15. Print filename setting
5. Select Save to keep the new settings or Cancel to keep the previous settings.
6. Follow these steps to verify the system is functioning as intended:
a. Create a new patient and a new session then capture at least one image.
b. Return to the Create/Select Session screen to select the previously created
patient and session.
c. Confirm that clicking Export and Print invoke the Windows dialog boxes to
perform these functions.
d. Delete an image.
7. Log out of the application.
Click Yes or No to enable or disable the
date / time stamp on the captured Image.
Select one of the
date / time formats
available.
Check Yes or No to print the
filename with the image.