Welch Allyn Suretemp Plus Calibration/Verification Module Notes - Quick Reference Guide - Manual (Page 3)

Speci
es
Code Definition / Description Origin/Alert
type
Traditional
code map
(ST+ OEM)
Traditio
nal code
map
(ST+
HH)
Details Host
controller
action
2 7 The message requires an
object, but did not
contain one.
Module/ Host
controller alert
Internal error None None
2 8 The object provided
with the message could
not be deserialized.
Module/ Host
controller alert
Internal error None None
2 9 The object could not be
serialized.
Module/ Host
controller alert
Internal error None None
2 10 The message is
performing a request/
action when the module
state prohibits the
request/action.
Module/ Host
controller alert
Internal error None None
2 11 The requested item is
not currently available
due to the module state.
Module/ Host
controller alert
Internal error None None
5 3 The factory settings, and
calibration information
is corrupt.
Module/ Host
controller alert
Internal
malfunction.
Contact Welch
Allyn
Technical
Service.
Indicate
module
error
5 4 The user settings are
corrupt.
Module/ Host
controller alert
Internal
malfunction.
Contact Welch
Allyn
Technical
Service.
Indicate
module
error
5 9
The calibration is not
set.
Module/ Host
controller alert
62
E4.8 Internal
malfunction.
Contact Welch
Allyn
Technical
Service.
Indicate
module
error
5 12 The error log is corrupt. Module/ Host
controller alert
Internal
malfunction.
Contact Welch
Allyn
Technical
Service.
Indicate
module
error
5 22 A hardware malfunction
has been detected.
Module/ Host
controller alert
Internal
malfunction.
Contact Welch
Allyn
Indicate
module
error