Welch Allyn Acuity LT Mobile - Installation Guide - Manual (Page 23)

Installation Guide Chapter 4 Install the system 19
2 uninterruptible
power supplies
For systems
with 4-7 APs, a
third UPS is
required.
G
G1
• Uninterruptible power supplies (UPSs) provide
emergency power to system components (model may
vary)
For a 28-patient system, the addition of the second
display requires a 750 VA UPS.
• Ground cables (connect to back of UPS and to
building ground)
One UPS near desk at nurses
station, one UPS in equipment
closet
For systems with 4-7 APs, a third
UPS in equipment closet
Modem H
H1
H2
H3
H4
• Modem for connection to CPU and dedicated analog
phone line to allow remote technical support (model
may vary)
• Power adapter
• AC power cord
• Data cable (for connection to modem and CPU
• Phone cord (for connection to modem LINE connector
and dedicated phone line) and noise suppressor
(attaches around phone cord)
Near desk at nurses station
a. Contact Welch Allyn for current part numbers and model numbers.
Table 4. Wireless Acuity LT System equipment
Equipment Item Description
a
Typical installation location