Installing the tower-to-rack kit, Installing the tower-to-rack kit -11 – Dell PowerVault 770N (Deskside NAS Appliance) User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the Tower-to-Rack Kit
^ NOTE:
If you ordered the tower-to-rack conversion kit, instaii the kit at this time.
^ NOTE:
If you have a rack-oniy version of the system, skip this procedure and proceed to
"Instaiiing the System in the Rack."
/t\ CAUTION: The system may weigh up to 43 kilograms (95 pounds) when fully
loaded. To prevent personal injury, do not attempt to move the system by
yourself.
The rack version and the tower version system are shown in Figure 1-7.
Figure 1-7. Rack and Tower Version Systems
rack orientation
tower orientation
The tower-to-rack kit includes the following items:
• One rack front panel with rack handles and thumbscrews
• One rack bezel, complete with keylock, keys, and attaching hardware
•
Six 10-52 shoulder screws
•
Six #10 flat washers
R a c k I n s t a i i a t i o n G u i d e |
1-11