Installing the system in the rack, Installing the system in the rack -15 – Dell PowerVault 770N (Deskside NAS Appliance) User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
F i g u r e 1 - 1 2 . I n s t a l l i n g t h e R a c k B e z e l
thumbscrew (2)
3
Reinstall the hard drives in their slots in the drive bay, if they were removed to lighten
the ehassis (see your Installation and Troubleshooting Guide for instruetions).
5
Install the power supplies and the mieroproeessor tray, if they were removed to lighten
the ehassis.
6
Close the bezel.
7
Replaee the system eover.
Installing the System in the Rack
/i\ CAUTION: If you are installing more than one system, install the first system in
the lowest available position in the rack.
/4\ CAUTION: Never pull more than one component out of the rack at a time.
1
Pull the two interior slide assemblies out of the raek until they loek in the fully-
extended position.
R a c k I n s t a l l a t i o n G u i d e
|
1-15