Hit Products RainPro Battery Operated Controller - Manual (Page 11)

10
Watering on Selected Days (P2)
If you would like to irrigate on specific days at the same time use
P2 program:
Note: Irrigation duration must be set first. P2 takes the start time directly
from P1. For instructions on how to set P1, see previous instructions.
Setting the Days
1. To set the days, Press MODE until the Clock Setting
screen appears , then press MODE again until the
Duration Time (with “tap” icon) appears, then press
MODE again until the P1 screen appears, and press
once again until the following screen appears:
2. Press SET to reach the day you wish to irrigate. The
number (corresponding to the day of the week) will flash.
3. Press + to select that day (the square which appears
indicates day is selected).
4. Press
-
to deselect a day.
5. Press SET until all days are programmed as desired.
Current day continues flashing.
6. Press SET to return to operating mode.