Hit Products RainPro Battery Operated Controller - Manual (Page 16)

15
Off Season
During the season when you do not need to irrigate, press the MODE
button quickly until OFF is displayed. DO NOT remove the battery. The
Controller is equipped with a back-up battery, and removing the main
battery for long periods will cause the back-up battery to discharge.
Troubleshooting
PROBLEM CAUSE SOLUTION
Controller does
not irrigate as
desired
Water at main water
supply is shut off
Check main
supply valve
Hose cut or blocked
Replaced damaged
section
Battery dead Replace battery
Controller set on
OFF
Set controller to
desired program
Controller improperly
programmed
Check program
and clock settings
Battery dead Replace battery Blank display
Controller in sleep
mode
Press MODE to
activate screen
Water does not
turn off
Valve blocked by dirt
or scale
Repair valve
Valve installed
backwards
Install valve so that
the arrow points in
the direction of the
water flow