Hit Products RainPro Battery Operated Controller - Manual (Page 14)

13
Example
If you wish to irrigate Sunday, Tuesday, Thursday and Friday at 9:00
in the morning, and at noon, and at 14:00 (2 p.m.) in the afternoon for
30 minutes each time, first make sure the clock is set, and run time is
set to 0:30. Then press
MODE until the clock setting screen appears,
press MODE a third time until the P1 screen appears, press again until
P2 appears, then press again until the P3 screen appears.
Choosing the Days
1. Press SET to move through the days, and reach the
day you wish to irrigate. The number (corresponding
to the day of the week) will flash.
2. Press + to select that day (the square around the day
which appears indicates day is selected).
3. Press
-
to deselect a day (no square showing).
4. Continue through all the days until day 7 is flashing,
then either press
SET to return to operating mode or
press + to select 7 (if desired) and then press SET.
(with the “clock face” icon and “tap” icon). Set 1 to 9:00, Start 2 to
12:00, and Start 3 to 14:00. After setting the irrigation start times,
the days at the top of the screen will flash. Set 1, 3, 5 and 6, then
press SET when your reach day 7. Make sure a square is around
1, 3, 5 and 6. The square indicated days to run.