Hit Products RainPro Battery Operated Controller - Manual (Page 7)

6
Programming the Controller
Meaning of Controller Icons
Note: Quick presses of the MODE button turns the Controller
off, or turns on the specific program (P1, P2 or P3). Longer
presses of the MODE button put the Controller in programming
mode.
Note: You cannot program the controller if it is set to manual
operation or if it is set to “OFF”. To release from manual operation
press
-
and SET simultaneously. To release from OFF press
briefly on the MODE button.
Controller will revert to operating mode after 30 seconds if no
buttons are pressed.
1. Irrigating days of the week
2. Program starts
3. Program #
4. Irrigation
5. Clock or Run Times
6. Low battery
7. Time adjustment