Hit Products RainPro Battery Operated Controller - Manual (Page 12)

11
Example
If you wish to irrigate Sunday, Tuesday, Thursday and Saturday
at 9:00 in the morning, for 20 minutes; Make sure the clock is set,
and you are in an operating mode. Then press
MODE twice to get
to the Duration Time (with “tap” icon). Set the duration time at 0:20.
Then set the clock (on the following screen with the “clock face”
icon and “tap” icon) to 9:00. Press
MODE to get to the P2 screen,
and then select days 1, 3, 5 and 7.
Watering Up-To Three Times a Day on Selected
Days (P3)
If you need to water more, up-to three times a day, on specific
days, use the P3 program.
Note: Run Time must be programmed first.
Setting the Start Times
To set start times, you must be in an operating mode (P1, P2,
or P3)
1. Press MODE until the clock setting screen appears, press
MODE again until the Run Time (with “tap” icon) screen
appears, press MODE a third time until the P1 screen
appears, press again until P2 appears, then press again
until P3 screens appears (The minutes will be flashing).