Hit Products RainPro Battery Operated Controller - Manual (Page 8)

7
Clock
Days of
the week
Current
Time
Setting the Clock
If screen is blank, press MODE to activate.
The Clock must be set before programming the Controller.
1. Press MODE for several seconds until the time
adjustment icon appears (the minutes will be flashing):
On this screen the numbers represent the current time. This is
a 24 hour clock. No A.M. or P.M. is shown.
2. Use the + and the
-
buttons to adjust the minutes.
3. Press SET to continue.
4. Use the + and the
-
buttons to adjust the hours.
5. Press SET to continue.
6. Use the + and the
-
buttons to select the current day
of the week. The selected day will flash.
7. Press SET to return to operating mode.