Hit Products RainPro Battery Operated Controller - Manual (Page 6)

5
The irrigation will continue until the set run time has passed. If the
irrigation duration has been set to zero, the valve will close after one
minute. To STOP irrigating, press
-
and SET simultaneously. This
will close the valve.
Programming Overview
This Controller offers 3 different Programs P1, P2, and P3.
Program 1:
Allows 1 Run Time from 1 minute to 11 hours 59 minutes with
1 Start Time, watering every day.
Program 2:
Allows 1 Run Time, one Start Time (the same as P1) but allows
the capability of selecting of Day or Days of the week to irrigate.
Program 3:
Allows 1 Run Time with up to 3 start times per day and the
capability of selecting the Day or Days of the week to irrigate.
• The Run Time is common for all 3 Programs
• The Start Time is common for P1 and P2
• P3 requires the Start Times to be set. The controller will
operate with only 2 Start Times set if desired.
• The controller has 4
MODES, P1, P2, P3 or OFF. The MODE
will be displayed along with the time and day of the week.
• Be sure the
MODE you want the controller to Run.
• See “Programming the Controller” instructions in this manual
for step by step programming instructions.