Cisco 700 MHz User Manual
Page 18
1-8
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
Chapter 1 Preparing to Install the Cisco Unified MeetingPlace 8100 Series Hardware
T1-Supported Protocols for Cisco Unified MeetingPlace Systems
End-to-end positive disconnect supervision is essential. Without it, Cisco Unified MeetingPlace cannot
reliably tell when a caller hangs up. Many PBX and central office systems can provide disconnect
signaling; we recommend E&M wink start lines because they provide for a positive answer and
disconnect supervision. In many cases, the person taking the order for the lines will not understand your
request, so you will probably need to escalate the request to someone with a technical background.
illustrates the Cisco Unified MeetingPlace digital telephony connections with T1 trunks.
Figure 1-2
Cisco Unified MeetingPlace Digital Connection Requirements—T1
T1 trunks
Channel
service unit
(CSU)
Special 23 ft cable
shipped with unit
T1 Smart Blade
PBX
T1 trunks
Cisco Unified MeetingPlace
Audio Server system
PSTN
153998
Customer-supplied
RJ-45 connectors