Cisco 700 MHz - Manual (Page 57)

2-33
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
About Telephony Configurations for Mixed Cisco Unified MeetingPlace Systems
Two MP-MA-4s are used for the IP configuration and are in slots 15 and 16, shown on the left.
For the T1 CAS configuration, there is a T1 Smart Blade in slot 1 and three Smart Blades in slots 2, 3,
and 4.
Figure 2-26 Back of Cisco Unified MeetingPlace 8112 (Mixed Configuration with 96 T1 CAS and
240 IP Ports)
Figure 2-27 shows the connections on the back of a Cisco Unified MeetingPlace 8112 with a mixed
Cisco Unified MeetingPlace system with 23 T1 PRI ports and 120 IP ports.
The MP-MA-4 that is used for the IP configuration is shown on the left in slot 16 and the Multi Access
Blade MP-MA-4 that is used for the T1 PRI configuration is shown on the right in slot 1.
There is a Smart Blade in slot 2 where 23 ports are used for the T1 PRI configuration, and 73 ports are
used for the IP configuration. There is another Smart Blade in slot 3 to support the remaining 47 IP ports.