Cisco 700 MHz - Manual (Page 11)

C H A P T E R
1-1
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
1
Preparing to Install the Cisco Unified
MeetingPlace 8100 Series Hardware
This chapter describes the requirements and hardware specifications for a Cisco Unified MeetingPlace
8100 series server.
To ensure that the Cisco Unified MeetingPlace configuration integrates within your environment, refer
to the configuration worksheets in the Installation Planning Guide for Cisco Unified MeetingPlace
Release 6.0 at
http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html .
Complete the pertinent worksheets before proceeding with the installation.
Caution Do not proceed with the installation until you have fulfilled every requirement in this chapter.
This chapter contains the following sections:
• Safety Warnings, page 1-2
• Hardware Requirements, page 1-3
• Tools Required for the Installation, page 1-4
• Environmental Requirements for the Cisco Unified MeetingPlace 8106, page 1-4
• Environmental Requirements for the Cisco Unified MeetingPlace 8112, page 1-5
• Power Requirements for the Cisco Unified MeetingPlace 8100 Series, page 1-5
• T1 Digital Trunk Requirements for Cisco Unified MeetingPlace Systems, page 1-6
• T1-Supported Protocols for Cisco Unified MeetingPlace Systems, page 1-7
• Wiring Requirements for Customer-Supplied Connectors—U.S., Canada, and Hong Kong, page 1-9
• Wiring Requirements for Customer-Supplied Connectors—U.K., Singapore, and India, page 1-9
• E1 Digital Trunk Requirements for Cisco Unified MeetingPlace Systems, page 1-10
• E1-Supported Protocols for Cisco Unified MeetingPlace Systems, page 1-10
• Modem Requirements for Cisco Unified MeetingPlace Systems, page 1-11
• LAN Requirements for Cisco Unified MeetingPlace Systems, page 1-12
• LAN Cable Requirements for Cisco Unified MeetingPlace Systems, page 1-13