Cisco 700 MHz User Manual

Page 76

Advertising
background image

5-4

Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x

OL-13417-01

Chapter 5 Testing the Cisco Unified MeetingPlace Audio Server System Installation and Upgrade

Testing Inbound Calls for T1 CAS, T1 PRI, and E1 Telephony by Using a Dialing Sequence

Step 5

When you hear the prompt “Welcome to MeetingPlace,” press 2. The Cisco Unified MeetingPlace
system replies with “Enter your profile number.” This verifies a full two-way connection between the
PBX and central office.

Step 6

Dial the Cisco Unified MeetingPlace system access number until each port is tested.

Testing Inbound Calls for T1 CAS, T1 PRI, and E1 Telephony by
Using a Dialing Sequence

To Test Inbound Calls for T1 CAS, T1 PRI, and E1 Telephony by Using a Dialing Sequence

Step 1

Ask the PBX administrator for the dialing sequence that controls which port picks up the call.

Step 2

For each port, press 2 and listen for the “Enter your profile number” prompt. This ensures a full two-way
connection between the PBX and central office.

Tip

We recommend that the PBX hunt from the highest port to the lowest port.

Testing Outbound Calls for T1 CAS, T1 PRI, and E1 Telephony

If Cisco Unified MeetingPlace is connected to a PBX, test outbound calls placed to extensions on the
PBX and calls placed to the public network. Make a call on each port. Test outbound calls on PSTN
connections, too.

To Test Outbound Calls for T1 CAS, T1 PRI, and E1 Telephony

Step 1

Access the CLI. If you do not already have terminal logging turned on, turn it on.

Step 2

Enter activity. The following example appears:

meetingplace:tech$ activity

VUI Configuration: 1152 Sessions, 1200 Confs

*** VUI INTERNAL STATUS UTILITY ***

DebugMenu:

1) Quick Status of all Ports 4) Make Test Call

2) Verbose Status of Port Range 5) Show All Confs

3) Display complete Port Information 0) Quit

Enter the Command (0 -- 100):

Step 3

To make a test call, enter 4. The Cisco Unified MeetingPlace system prompts you for a destination phone
number.

meetingplace:tech$ activity

VUI Configuration: 1152 Sessions, 1200 Confs

*** VUI INTERNAL STATUS UTILITY ***

Advertising