Canon C75 - Manual (Page 106)

7-24 Sending Faxes Chapter 7
7 Press Start (Start/Scan) to begin scanning
for sending.
• The unit automatically dials the access and ID
codes registered under the M button and then
dials the other party’s fax number.
• To cancel sending once dialling has started, press
Stop then T . ( → p. 7-10)
n • To protect your access and ID codes, these are not printed on any reports.
• If you frequently call the same numbers with this feature, you can register the access and ID
codes together with a fax/telephone number for speed dialling. ( → below)
Registering Speed Dialling With the M Button
By registering your access and ID codes together with the fax/telephone number for one-
touch speed dialling or coded speed dialling, you can send documents or make calls over
these services at the press of one or a few buttons and without having to press M.
n • You must first register the access and ID codes under the M button before you can register the M
button under speed dialling entries. ( → p. 7-22)
• For details on registering numbers for speed dialling, → Chapter 6.
Follow this procedure to register the M button settings for speed dialling:
1 During speed dialling registration, when you
come to the step that requires you to enter
the fax/telephone number, press M.
2 Use the numeric buttons to enter the fax/
telephone number you want to register.
3 Continue with the procedure for registering
entries for one-touch or coded speed dialling.
Once you have completed the above procedure, you can simply press the one-touch speed
dialling button or press Coded Dial and enter the coded speed dialling code to dial the fax/
telephone number using the UK Call, Global Call, or Day Call Service of Cable and Wireless
Communications Limited.
TEL=M_
Ex:
TEL=M987 6543_
Ex: