Canon C75 - Manual (Page 96)

7-14 Sending Faxes Chapter 7
4 Enter up to 113 fax numbers using any of the
following methods:
■ One-touch speed dialling:
Press the desired one-touch speed dialling
button(s).
■ Coded speed dialling:
Press Coded Dial, then use the numeric
buttons to enter the two-digit code. Repeat
for other codes.
• Be sure to press Coded Dial before each code.
Sequential Broadcasting
Sending a Document to More Than One Destination
This feature allows you to scan a document once and send it to several destinations. You can
send the document to a maximum of 113 destinations using a combination of the following
dialling methods:
• One-touch speed dialling: up to 12 destinations
• Coded speed dialling: up to 100 destinations
• Regular dialling (using the numeric buttons): one destination
You can enter the destinations in any order. (Be sure to press Set after your entry with the
numeric buttons.)
n If you frequently send documents to the same group of destinations, you can group them and
register these numbers for group dialling. You can register up to 111 fax numbers with group
dialling and send the same document to these numbers at the press of one or three buttons.
(
→ p. 6-9)
Follow this procedure to send a document to more than one destination:
1 Open the document tray (MultiPASS models
only).
2 Adjust the document feed lever for the
document you are loading. (
→
p. 4-2)
3 Prepare the document and load it, face down,
in the ADF. (
→ p. 4-4)
• For colour sending, press Colour/B&W (Color/
B&W) to turn on its light. (
→
p. 7-3)
• To adjust the resolution and contrast,
→
pp. 7-4,
7-5.
(Currently used memory)
(Standby to scan)
Ex:
Ex:
Ex:
MEMORY USED 0%
DOCUMENT READY
TEL=905 795 1111
A01
TEL=03 3758 2111
Ex: