Canon C75 - Manual (Page 65)

Chapter 5 Paper Handling 5-13
P
aper Handling
Printing on Fabric Sheets
Canon Fabric Sheet FS-101 comes with a booklet that describes special handling procedures.
Be sure to read this booklet for special information on fabric sheets.
n • Do not use the fixing agent provided with the Canon Fabric Sheet FS-101. This agent is not
necessary when printing with your unit.
• Do not touch newly printed fabric sheets until the ink has dried completely. This takes about an
hour.
Follow this procedure to load a fabric sheet in the multi-purpose tray:
1 Make sure the paper thickness lever is set to
e (right).
• For details, → p. 5-6.
c Do not set the paper thickness lever
while the unit is printing since this will
cause problems.
2 With the cloth side towards you and the open
end at the top, insert one fabric sheet into the
multi-purpose tray
q , and align the right edge
of the sheet with the right side of the multi-
purpose tray. Slide the paper guide snugly
against the left edge of the sheet
w .
3 Your unit is now ready to print. Set your PC to
print on the fabric sheet.
4 When the fabric sheet is printed, let it dry for
about an hour to allow the ink to dry
completely.
5 When dry, peel the film backing from the
printed fabric sheet.
Ink Cartridge BCl-21 Color
Made in Japan
Ink Cartridge BCl-21 Black
Made in Japan
1
2
Open end at the
top