Rx (reception) settings menu – Canon C75 User Manual
Page 191
Chapter 14
Summary of Settings
14-7
Summar
y of
Settings
RX (Reception) Settings Menu
For details on accessing the settings below,
→
pp. 14-2, 14-3.
Setting
Description
Sub-Settings
ECM RX
Enables/disables Error Correction Mode (ECM)
during reception.
ON
OFF
RX MODE
Selects the receive mode. (
→
Chapter 8)
If you select
FAX/TEL AUTO SW
, you can select
additional sub-settings. (
→
p. 8-6)
FAX ONLY MODE
FAX/TEL AUTO SW
INCOMING RING
When the unit is set to
FAX ONLY MODE
or
FAX/TEL AUTO SW
, enables/disables ringing
when it receives a call.*
OFF
ON
RING COUNT
**
Selects the number of incoming rings before the
unit begins receiving.
2 TIMES
(
1
to
99
)
MAN/AUTO SWITCH
When the unit is set to
MANUAL MODE
,
determines if the unit switches to fax receive mode
after it rings for a specified time.
OFF
ON
F/T RING TIME
**
If you select
ON
above, selects the length of time
the unit rings before switching to fax receive mode.
15 SEC
(
1
to
99
)
REMOTE RX
Enables/disables remote receiving.
ON
OFF
REMOTE RX ID
**
If you select
ON
above, selects the remote
receiving ID.
25
(
00
to
99
)
MEMORY RX
Enables/disables memory reception of a document
(e.g. when an error occurs).
ON
OFF
COLOUR RX
(
COLOR RX
)
Enables/disables colour fax reception. (
→
p. 8-12)
ON
OFF
(Default settings are shown in bold type.)
* Even if you have set
INCOMING RING
to
ON
, ringing will only occur if you have connected the optional
handset, a telephone, or an extension phone to your unit.
** This setting is available in all models, but the setting names only appear in the MultiPASS C75/FAX-
B215C.