Removing shipping materials – Canon C75 User Manual
Page 17
Chapter 2
Setting Up
2-3
Setting Up
Removing Shipping Materials
Follow this procedure to remove the shipping materials. Keep them in case you need to
transport the unit in the future:
MultiPASS C75/FAX-B215C
1
Remove the shipping
tapes from the top of
the unit.
2
Remove the protective
piece from the multi-
purpose tray.
6
Open the operation panel partially
by gently pulling it towards you (it
only opens slightly). Then remove
the protective sheet from the ADF.
Close the operation panel by
pressing it down from the centre
until it locks into place.
5
Open the document tray (MultiPASS
model only), then remove the protective
sheet and shipping tapes.
n
The actual shipping materials may differ in shape, quantity, and position from the ones shown
above.
3
Remove the shipping
tape and protective
piece from the bottom
of the unit.
4
Remove the shipping
tape and protective
piece from the output
tray.
7
Open the printer cover, then remove the
shipping tape from the side of the unit.
Close the printer cover and document tray.