Canon C75 - Manual (Page 85)

Chapter 7 Sending Faxes 7-3
Sending F
a
x
e
s
Preparing to Send a Fax
Documents You Can Fax
For information on the types of documents you can fax, their requirements, and details on
loading documents,
→
Chapter 4.
Adjusting the Quality of Your Faxes
Canon’s Ultra High Quality (UHQ™) imaging technology enables you to send documents that
are very close to the quality of the original. Your unit allows you to send a document in colour
or black & white, and to adjust the resolution and contrast to best suit your particular
document.
Setting Colour or Black & White Transmission
Your unit can send faxes in black & white. It can also send faxes in colour to fax machines
with colour capability. Before sending a document, you need to adjust whether the document
will be sent in colour, or in black & white only.
■ ■ ■ ■ ■ To send in black & white:
Make sure the Colour/B&W (Color/B&W) button’s light is off. If not, press Colour/B&W
(Color/B&W) to turn it off.
■ ■ ■ ■ ■ To send in colour (to fax machines that support colour fax reception):
Press Colour/B&W (Color/B&W) to turn on its light.
n If you attempt to send a colour document to a fax machine that does not support colour faxing, the
document will not be sent and the LCD will display
TRY AGAIN IN B&W ( TRY AGAIN IN B/W ).
Try sending again in black & white. For the MultiPASS C75/ FAX-B215C, you can enable the
COLOUR DIRECT TX setting (
→
p. 14-6) that converts colour faxes to black & white if the other
party’s fax machine does not support colour faxing, thus enabling you to send colour documents to
any fax machine without an error occurring.