Canon C75 - Manual (Page 188)

14-4 Summary of Settings Chapter 14
User Settings Menu
For details on accessing the settings below,
→
pp. 14-2, 14-3.
Setting Description Sub-Settings
DATE & TIME Sets the current date. ( → p. 3-7) –
UNIT TELEPHONE # Enters the fax/telephone number you want to
appear at the top of each fax page you send. ( →
p. 3-7)
–
UNIT NAME Enters the name or company name you want to
appear at the top of each fax page you send. (
→
p. 3-7)
–
TX TERMINAL ID Sets the options for the identification header (TTI). ON
OFF
TTI POSITION Selects the position of the identification header
(outside or inside the image area).* (
→ p. 3-6)
OUTSIDE IMAGE
INSIDE IMAGE
TELEPHONE # MARK Selects the prefix for the identification header
number. (
→
p. 3-6)
FAX
TEL
SCAN CONTRAST Selects the scanning contrast. (
→
p. 7-5) STANDARD
DARKER
LIGHTER
OFFHOOK ALARM Enables/disables the off hook alarm that alerts you
that the handset is not seated properly in its
cradle.
ON
OFF
VOLUME CONTROL Sets the volume of the unit sounds. –
CALLING VOLUME Selects the ring volume when the unit detects a
voice call.
1/2/3
KEYPAD VOLUME Selects the keypad touch beep volume. 0 (off) /1/2/3
ALARM VOLUME Selects the error alarm volume. 0 (off) /1/2/3
LINE MONITOR VOL Selects the line monitor volume (sound during
dialling). 0 (off) /1/2/3
RX CALL LEVEL Selects the volume of incoming calls. HIGH
STANDARD
TEL LINE TYPE Selects the dialling method the unit uses for your
telephone line type. (
→
p. 3-10)
TOUCH TONE
ROTARY PULSE
**
R-KEY SETTING Enables dialling through a switchboard. PSTN
If you select PBX , you can select additional sub-
settings. (
→
p. 3-11)
PBX
M-KEY SETTING ***
(All models except the
MultiPASS C75/FAX-
B215C)
Selects the access and ID codes for an alternative
long distance service. (
→
p. 7-21)
OFF
ON
(Default settings are shown in bold type.)
* Can only be adjusted for black & white transmissions. For colour transmissions, the TTI information is
positioned inside the image area.
** The default setting for Ireland is ROTARY PULSE.
*** This setting is only available in the UK.