Canon C75 - Manual (Page 113)

Chapter 8 Receiving Faxes 8-7
Receiving F
a
x
e
s
Follow this procedure to set the Fax/Tel Mode options:
1 Follow steps 1 to 9 on page 8-5.
2 Press Set.
3 Use the numeric buttons to enter the time the
unit waits before ringing when it receives a
call.
• You can select from 0 to 30 seconds.
• The default setting is eight seconds.
4 Press Set twice.
5 Use the numeric buttons to enter the time the
unit rings while waiting for someone to pick up
the handset.
• You can select from 10 to 60 seconds.
• The default setting is 22 seconds.
6 Press Set twice.
7 Use d or u to select RECEIVE or
DISCONNECT .
• This setting tells the unit what to do if no one picks
up the handset within the specified ring time set in
step 5.
• Select RECEIVE to receive the call, or
DISCONNECT to disconnect the call.
• The default setting is RECEIVE .
8 Press Set.
9 Press Stop to return to standby mode.
Ex:
Ex:
Ex:
Ex:
Ex:
Ex:
Ex:
RING START TIME
8SEC
9SEC
F/T RING TIME
22SEC
30SEC
DEFAULT ACTION
RECEIVE
DISCONNECT
INCOMING RING
15:00 FaxTel