Canon C75 - Manual (Page 22)

2-8 Setting Up Chapter 2
Connecting Your Unit to a PC
To connect your unit to a PC, you will need to purchase a printer cable that matches the
interface connector on your PC:
• A Centronics ® -compatible parallel cable (IEEE 1284-compliant) no longer than 2 metres
-or-
• A USB cable no longer than 5 metres (MultiPASS C75/FAX-B215C only)
You can purchase either of these cables from your local authorised Canon dealer.
Follow this procedure to connect the appropriate cable:
■ ■ ■ ■ ■ Connecting a USB Cable
(MultiPASS C75/FAX-B215C
Only)
Connect the USB cable to the
unit and PC during software
installation to ensure proper
operation of the printer driver.
(
→
Software User’s Guide)
■ ■ ■ ■ ■ Connecting a Parallel Cable
Connect the parallel cable to
your unit and PC. Be sure to
secure the cable connectors
with the wire clips.
n • You only need to connect one of the above cables (MultiPASS C75/FAX-B215C only).
• If using a USB cable (MultiPASS C75/FAX-B215C only), make sure your PC is running Microsoft
Windows ® 98/Me or Windows ® 2000, preinstalled by a computer manufacturer on purchase. (The
USB port operation also needs to be assured by the manufacturer.)