V.I.O. POV.1.5 - Manual (Page 16)

16
Playing Video
When the POV.1.5 is first turned on it is placed in Standby mode. To play video on
the POV.1.5, press the PLAY button to switch it into Play mode. The display will
change to show the opening frame of the most recently saved video.
Press the PREV or NXT soft keys to step through the video clips that are saved on
the SDHC card.
• Each time you step through the clips the first frame of that clip will be shown
in the display.
• The Time Status indicator in the upper right hand corner of the display will
show the length of each clip.
When the desired video clip appears, press the PLAY button to play the clip.
• When the clip is playing the Time Status indicator will change to show the
elapsed time since the beginning of that clip.
• If you marked a video segment with a tag, the word TAGGED will appear
underneath the counter while that segment is being played.
To erase an individual clip press the DEL soft key while that clip is selected. Prss
YES to confirm that you want to delete the clip.
During playback, the three soft keys allow you to fast-forward, reverse play, pause
and resume play.
•
Pressing the << soft key reverses play at 1X speed. Pressing << again
speeds reverse play up to 2X normal speed. After pressing <<, normal play is
resumed by pressing >>.
• Pressing the >> soft key speeds up forward play to 2X speed. Pressing <<
slows down playback speed from 2X to 1X
Pressing the PLAY button during playback stops the playback and returns to the
main Play mode display.
Connecting the POV.1.5 to a TV or Other Video Device
You can output video from the POV.1.5 to a TV or any standard video device that
accepts a composite video-in signal such as a VCR or DVD recorder. Video can
be played on both the POV.1.5’s built-in display and an external video device
simultaneously.
A color-coded analog video cable is included with the POV.1.5 for connecting the
unit to a television monitor or other video device.
One end of the cable has a 1/8th inch mini phono jack and plugs into the bottom
of the POV.1.5 in the Input/Output Port area (you will need to remove the Input/
Output Port cover to access this connector).
The other end of the video output cable is color coded with a yellow RCA connector
for video out and a white RCA connector for audio out. These can be plugged into
a composite input jack on a TV or other video device. See your TV or video device
manual for details about selecting the input as the video source.
NOTE: The POV.1.5 outputs video in both the NTSC and PAL video formats.
In the U.S. the format standard is NTSC and in Europe the standard is PAL.