V.I.O. POV.1.5 User Manual

Page 8

Advertising
background image

8

Powering the POV.1.5

Press the POWER button to start the

POV.1.5. The button only needs to be

pressed briefly, holding it down too long will

cause the POV.1.5 to turn off again.
The POV.1.5 is powered by 4 AA batteries.

When the POV.1.5 is connected to a

computer via a USB cable, the POV.1.5 will

draw power from the computer instead of

the batteries. However, when the POV.1.5

is being powered by the USB cable it is in

USB mode and can be accessed from the

computer - the controls on the unit itself are

disabled with the exception of the POWER

button. Please note that batteries can not be

recharged from the USB power source, nor

can you record while in USB mode.
The amount of recording time you can get

from a set of batteries depends on several

factors:

The type of batteries you use

The internal settings of the

POV.1.5 (such as video resolution)

The external environment

(operating temperature can affect

battery life)

If you want to have a lower-cost and more environmentally friendly solution you

can use rechargeable batteries.
WARNING: Do not mix old and new batteries. Do not mix alkaline, standard

(carbon zinc), lithium ion or rechargeable (nickel cadmium) batteries. Dispose of

used batteries responsibly.

On average a set of standard alkaline batteries should last about 4-5 hours and

lithium ion batteries can last up to 10 hours.

Advertising