V.I.O. POV.1.5 - Manual (Page 17)

17
To change from NTSC format to PAL:
1. Press the SETTINGS button on the POV.1.5
2. Press the NXT soft key until VIDEO OUTPUT is shown in the display, and
press SELECT
3. Use PREV or NXT to choose the appropriate setting, and then press SELECT
If you set the format to PAL you should also change the FRAME RATE setting to
25 frames per second to optimize PAL video playback.
1. Press the SETTINGS button on the POV.1.5
2. Press the NXT soft key until FRAME RATE is shown in the display, and press
SELECT
3. Use PREV or NXT to choose 25, and then press SELECT